Mophorn Al-310S Power Feed X-Axis 450 in-lb Torque,Power Feed Milling Machine 0-200PRM, Power Table Feed Mill 110V,for Bridgeport and Similar Knee

Brand: Mophorn

Color: 450 In-lb X-axis Torque

Features:

• Model: Al-310S; Type: X traverse; Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min
• Small volume and easy installation power feed, jog function operates at any feed speed; Excellent speed control in the entire range
• Noiseless direction changes, better surface smoothness and power table feed won’t vibrate or strain in low speed
• Safety feature to protect transmission gear and electronic components, as to meet the requirements of ergonomics.The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.

Binding: Tools & Home Improvement

model number: Power Feed for Milling Machine

Part Number: Power Feed

Details:

Al-310S X-Axis Torque 450 in-lb Power Feed Milling Machine 200PRM Power Table Feed Mill

AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8″ Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First…etc. The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.

Feature

Type: X traverse

Model: Al-310S

Voltage: 110V, 50/60Hz

Rotate speed: 0-200 RPM

Max torque: 450 in-lb

Max feed rate: 650mm/min

Max return speed: 850mm/min

Effortless operation

Noiseless direction changes

Better surface smoothness

Small volume and easy installation

Excellent speed control in the entire range

Power table feed won’t vibrate or strain in low speed

Direction control knob for easy and rapid operation

Safety feature to protect transmission gear and electronic components

Warning

1. To stop jog operating, you must first turn “FEED KNOB” to “0”(OFF) position. Then move “JOG SWITCH” to “FEED” position.

2. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement.

Package Content

1 x Power Feed For Milling Machine

8 x Adjustable Pad

2 x Tiavel Stop Assembly

1 x Adapter

1 x Bevel Gear

1 x Dial Nut

1 x Locking Nut

1 x Product Manual

EAN: 0719034836089

Package Dimensions: 15.4 x 13.3 x 7.4 inches